Production bricks with mold number G 1
All bricks have the mold pip on the short side and a flowrib. Red: scratched numbers (I found 1 to …
Production
A brick is considered a “production brick” if it is or was sold to the public in a LEGO® set (or similar).
Bricks with flowrib – 5 x C3
Some cleaning required 🙂 According to the record of the 1988 court case Interlego AG v Tyco Industries Inc the …
Samsonite G
Logo: Samsonite “Open O” logo. Material: CA and ABS. Inner ribs: none. Inner tubes: with rounded bottom. Flowrib / center …
Samsonite – Number on Short Side
This is one of two molds that uses the Samsonite Open O logo and has a mold number on the …
Sideways Logo
Comparing the different versions of bricks with sideways logo. On the left the UK version of the brick with the …
Samsonite – Number Below Left Tube
It seems like this mold had (at least) two life phases. Initially the logos were in the normal position, later …
Samsonite – Crossed Open O logo
These bricks are nearly impossible to photograph. They are so shiny that either they reflect so much that all details …
Samsonite Logo
Bricks with the Samsonite logo, found in the USA. Because of the angle of the photo, i lost some of …
Samsonite Brick With Tubes, Mold Pip Edge, Large Font P
These bricks can be found in the USA. Initially, they were made with the Narrow straight O inside circle logo …
A Note About Cross-Supports
Clutch power is the magic that makes LEGO work. It is “the ability of its bricks to snap together tightly …