Bricks With Cross-Support, Mold 133
Logo: modern logo Material: ABS Inner wall: thin with vertical ridges Inner ribs: Between the outer ridges on the long …
Logo: modern logo Material: ABS Inner wall: thin with vertical ridges Inner ribs: Between the outer ridges on the long …
Logo: modern logo Material: ABS Inner wall: thin with vertical ridges Inner ribs: Between the outer ridges on the long …
3001old without cross support, with the mold pip on the stud, and the mold number above and/or below the tubes. …
Logo: Modern logo. Material: Polycarbonate (ABS is not transparent) Inner ribs: yes. Visible as a frosted line on both the …
Most of the 3001old bricks with the mold number inside the tubes were made in white, red, blue, yellow, black …
The molds for the bricks with split tubes and mold numbers 77 to 97 were revised a few times. I …
In 1973 LEGO introduced a new version of the brick. (Drawing date according to LEGO vs Tyco, introduction into sets …
Here is an overview of the mold versions I found for the bricks with tubes, without cross-support and with the …
Minitalia – oLo – LEGO Technic As far as I know, all these bricks were introduced in 1970. — My …
Minitalia left and oLo right. The bricks are very similar, but can be easily identified by the stud logo. The …